Thanks!!
I am looking at a1968 CJ5 that is in great shape. It is a v6 and has a PTO winch. Will the winch be a problem if I want to put overdrive in her?...
It looks like stock springs with long shackles. Would new springs with 2.5 inch lift center the axle with the right shackles??
Going to look at this cj5. What would cause The rear wheels to look off center? Too Much lift? They are shifted forward. Can't get Photo to...
Looked at a 68 v6 today, no good. Any leades around central NJ would be a big help. I'll travel about 300 miles. Scott
Thanks guys. Great ideas. Now I need to find my 68 Scott
I'm thinking or buying a 1968 v6 cj5. Any trans swap ideas? I'm new with the v6 options and am looking for ideas. 4 or 5 speed or auto. Any ideas...
I use EZ-LOK inserts. It is what I learned to fix threads with. http://www.ezlok.com/Home/index.html Scott
What in-line fuel filter setups are you using? Scott
Mortten, Thanks for the PN's, I going to get a price at Parker Hannifen first. Scott
Does anyone know the NAPA part numbers for the flexible brake lines for a 1952 M38 or cj3a? Scott
Autozone 30Wt
m38aI Engine removal link http://willysmjeeps.com/downloads/M38A1-Maintenance[1].pdf
M38A1 radiator, motor, transfer and tranny can come out as a unit as long as it is not a late a1. Here is your manual...
Awesome article! :beer: Thanks
Who has some of thoes BURNS manifolds around?
Nate, I have a 52 M38 that has a cj motor in it. It is still 24v but I want to hot rod up the motor, and rebuild an MC motor for later. The Cj...
Nate, Let me now what type of mods you are looking at. Scott
Has anyone done any speed work on an L134? I can find a header but am looking for an intake? Scott
Separate names with a comma.