Does anyone have a good fix/suggestion for quieting the hinge rattle on a 73 cj pass seat? Tried brazing it tighter some years ago with only short...
Anyone know what the range of years for valve covers that will fit a 1973 258 6 cyl?
Anyone have a method for installing the return spring. It's so stiff that it's almost impossible to stretch into place.:?
Not having any luck with the search function, but it's probably me. I have a 2100 on a 1973 258 and am trying to find out what most of you are...
Looking for any opinions about a problem I'm having with the D44 in my 73 CJ. I just completed the re-build on the CJ which included a gear ratio...
Tim, I thought I would direct this to you since in the past you seem to have a good handle on part numbers. I purchased some seat covers from...
Are there other sources for a cast aluminum valve cover for a 1973 258 in addition to Clifford, or are they the only source?
On the 1973 258 6 cyl. the heater hose connections at the engine are different sizes. They look to me that one is 3/4 and the other, ( to the...
I'm thinking of removing these hose connections on my 1973 258 with 1982 intake. I'll only be using it in warmer weather and thought they wouldn't...
Anybody have suggestions for a respectable looking method to plug the heater outlets on a 258 engine? I'm not installing the heater at this time...
I'm looking for a picture of the front body tub mount on a 73 cj5 if available. I tried searching this site for"front body mount", but came up...
Did the 73 CJ come with seat belt? I bought mine when it was 4 years old and can't remember if it had any at the time. Just trying to figure out...
Timgr, I read your response to Bobfortier's question and I thought I'd get some info for my situation. I'm putting an 83 intake/exhaust...
I'm replacing my 73 cj frame with one that's from a 75. The 75 frame has a proportioning valve installed in the line and the line fittings are...
I'm in the process of upgrading my stock ignition on my 73 cj with 258 from points. The question I have is, what's the proceedure for setting...
I'm looking for someone to refresh my memory as to the correct manual steering box lube. I haven't had my 73 CJ on the road for about 8 years and...
Separate names with a comma.