Mine cost $700 to do in So Cal. Just for the fronts.
I just got a complete parking brake assembly, from the handle all the way to the brackets on the brakes. Cost $150 but well worth it since mine...
I am picking up a 78 CJ7 in the morning and need to flat tow it about 300 miles home. Rolling hills and some steep grades. My tow vehicle is an...
I have seen a couple adds on Craigslist and EBay of CJ5's with V8's and 350 Automatic Tanny's. Is it easy to fit a 350 in a Early CJ? I thought it...
Here is my front end. [IMG] [IMG] [IMG] [IMG]
Rubicon says '76 and up only. My PO did a shackle reversal and body lift. Also possibly extended front springs, but I don't know for sure. Then he...
My '73 CJ5 does not have a parking brake and ALL of the parking brake components have been removed by the PO. Putting it all together looks to be...
I found the factory nuts for the passenger seat. They were still intact inside the storage bin. Does anyone know what size and thread they are? It...
A large washer it is then. Thanks for the response.
Do you think using just washers between the tub and the nut is good enough for seats and seatbelts. I was thinking some 4" x 4" steel with a whole...
Sorry, I don't have OEM belts. Just whatever the PO had in it. I just want to put them in the correct place for the seat location. Trying to be as...
I thought those belts looked just like some 70's Chevy belts.
I have had a couple requests to see how my old seats mounted. It was a crappy and I don't think safe job, but here are the PICs. Might help you...
Cool, thanks. On the outside, did the belts route through a channel of some kind or are they loose?
Thank you. That looks like it will be very easy to recreate. It also has a nice view of the seat belts, that I needed.
Thanks. I can see no original holes. He plugged them and then sprayed on a bedliner.
He sprayed on a bedliner and might have plugged the holes. I could not find any.
Could I get a PIC of that bracket that mounts to the floor? My seat has the hook, I just don't have the part that mounts to the floor. Thanks.
I have sucked a lot of information and asked a lot of questions on this site in the past week or two. Being so new to Jeeps and not that far along...
Anyone able to take a look at this for me? Thanks.
Separate names with a comma.