J-weld will work fine or a extra large bead of silicon. Not that bad of a break. Like all the rest of us, blame the dog.
What does everybody use: Walkie-talkie or CB Radio I have a pair of Walkie-talkies from Cabelas but I was wonder if it would be worth it...
Amen, I thought it was hanging off the ceiling, and only someone crazy to walk under it.
cost conscious = ? Dude, jeep = $$$$$$ Try a cheaper hobby like golf or something Like they said t-18 has a granny gear. Maybe pull a...
Also guesses are also welcomed !!!
I replaced my clutch/pressure plate/ throw out bearing / pivot bearing/ resurfaced the flywheel on a T-98. The pressure plate is about 1/2 inch...
True, they gave you the "COOL JEEP DISCOUNT" If it was a LEXUS or something it would have cost you about $1,500.
Just installed a new clutch last night and when I was done, mine did the same thing. Pressure plate hitting bellhousing. I drove it until it...
Wow looks great. I would not ruin that body with diamond plate. I use it because my sides have rusted out.
Good point, never thought of that You are wise ! :patriot:
Close but backwards. Clockwise push the screw in more and allows less fuel. Conterclockwise push the screw back letting more fuel. I learned...
With the clutch in or out? Clutch In: Clutch plate being pushed to far in. Hitting Flywheel: With clutch out? Spring in clutch are...
I will post a picture of the tranmission later tonight. The PTO cover is on the driver side but no tabs in the front. Probably cut off so the...
Gee I never get replies. I guess I am hated or something
and a T-98-1z? I found a tran that on top says t-98 but on the driver side it has T-98-1z. So are the T-98-1z same as a T-98? If not what...
Does anybody know a good company to order a new clutch for: Chevy 350 connected to a T-18A? I want to see what the cost is of replacing it.....
Today jacked the back to replace fuel lines from the tank. Once finished, dropped jeep off jacks. Drove for about 3 miles and when I put the...
Cheap battery. battery can not handle the charge. I used to have an AUTOZONE that leaked acid and bubbled all the time. It started to show...
Before replacing the whole body. Check the bolts, they might be loose. Also I would not drive the way it is now. Sounds like duct tape and...
I agree. Weld the crack and then put a plate over it and weld it too. Also I am in the DFW area and I would gladly do the welding. What is...
Separate names with a comma.