Yes I bought a 29t 10 spline gear just didn’t know that the t14 needed a larger hole transfer case a friend might sell me one I really like the...
The top is a t90 but the case says t86AA I promise you it has t86 gears I bought the t86 rebuilt kit which has needle bearings in the reverse...
No I rebuilt the t86 it has t86 gears
Mine does not look like that I’m standing right next to the transmission it’s a t86AA
Don’t know how to upload pictures on side of case says t86AA
It’s a t86 has the d18 with 3 5/32 hole the bearing is held in by the transfer case no retainer
No the t86 the transfer case holds the bearing in no retainer
The transfer case is the same
Apparently there are two different sized Dana 18 3 5/8” and 4” is there a an adapter for the smaller d18 ?
I’m trying to put a dana 18 behind my t14 but bearing retainer is to big do they make a difference retainer for 18 and 20
No it’s a 225 getting ready to take to machine shop was just wondering. all my other ones are aluminum
My 225 has a cast iron timing cover. The first one I’ve seen what years is it from?
hi. will a t150 bolt up to my 225 and d18 in replace of my t86? there is a guy close selling one rebuilt. thanks,ed
the input shaft on t86 is larger and longer than the shaft in my t90 what is involved in putting the t90 gears in a t86 any help will be...
thanks timgr
t86 needs rebuilt first and reverse chewed up and need bearings and leaks know most on this site replace all gears with a t90 my question is can...
thanks how can you tell the difference what is the tell tell sign it's a m38 besides 24 volt system
thanks everyone just ordered 1176 online looked like they should work find out in a few days
the m38 was built in 50 and 51 seams like it would be hard to find parts as it was only built for two years. thanks for the heads up on od on...
ok bruiser my 66cj5 is almost done .why bruiser because its black and blue .would like to know if you had a choice between cj3b or cj2a which...
Separate names with a comma.