And the axle end [IMG]
Heres the backing plate [IMG]
My 62 CJ5 has the Dana44 2 piece axle on the rear and I was looking to swap it over to rear 'E' brake and 11" brakes and low and behold it all...
What I meant to say was galvanized has less friction drop than black pipe.The condensation that forms in pipe leads to rust in the black.The fire...
Bill, I'm a Ind Pipefitter by trade, if you're wanting to keep the pressure up go with a larger dia. ,say 1" ( or larger as this also becomes a...
The transfer case in my 62 cj5 doesnt have the e-brake on it and I need to install an e-brake. So ,with that said what year has an rear e-brake...
I did a little more searching here and found the picture page with the markings outlined for the diff. types then went back out and scraped and...
I was out earlier trying to scrape some of the grundge off the undercarriage of my '62 CJ5 today and decided to try and identify the differential...
Southtowns27,what mufflers did you use ? My 78 Chev4x4 454 has Turbo's and they're pretty bulky but theres a lot of room under the 78's frame. I...
Scott thanks for the pics link.Your exhaust routing is what I'm going to request when I get it redone.
Mine has the center dump manifolds,who ever did the exhaust went up and over the frame. I started pulling the pipes off today so I could move the...
Wheres a good place to find headers for a 62 Willys with a 327 motor ?It appears the headers would need to exit above the frame.Presently I have...
Did some thinking on it and I went out and had another look and came up with a plan(I think).First ,I need to add about 1 " to the front mtr mts...
mruta thanks for the responce, I dont know exactly what angle you're after but the driveline will be approx. 18" long as it sits now with a 2"...
First off ,howdy from a newbie!! Well the title says it all. I picked up a basket case '62 Willys with a strong 327 in it last summer.The...
Separate names with a comma.