I also could only find a fuel injected version in the Grand National, which the cost of one of those really wouldn't be cost effective. I guess...
Was there ever a 231 Buick that came with factory fuel injection for RWD applications? Thanks, Randy
The studebaker is a tight fit. However the cylinders are siamese, so the overall length of the block is not too long. That said, I did modify...
In case that didn't come out clear, what automobile came with the 231 fuel injected for RWD application? Thanks again.
Hi, I have a 46' Cj-2A, that is lifted, with dana 44 axles front and rear, full cage.... Mild off-road vehicle, hard top, used on the street a...
Who sells a Bikini top for a CJ-3A, square tube windshield frame? Thanks, Randy
I have a glass body on my CJ-2A and love it. The only reason I can see for going with metal, would be if you are doing an exact restoration....
Yes, that's the one, bright yellow and suicide doors.
That is actually an Artic Hardtop. I have one and modified it to fit my stock windshield on a CJ-2a. I didn't like the way the windshield for...
That is an Artic Top. When you say you have a windshield frame you do realize it's a special frame that fit's that top correct? That top will...
I have a Studebaker 170 OHV in my 46 CJ-2A. The engine is from a 1963Studebaker Lark. The bolt pattern of the bellhousing is the same as the...
After you take your jeep for a nice long drive, how hot do the tranny and transfer case get? I don't have a temperature gun, but you can't hold...
I have a straight six Studebaker 170 cu. in. mounted in my CJ-3A, why not go against the grain a little? Fuel injection would be nice, however....
I have already did the modification also, except for I didn't file any channels for oil to return, seems to work fine in that respect. That sure...
I noticed the bearing retainer bolts have a small copper washer on each one, was that original, and are they available? I put some sealant on the...
I have some leaks coming from the front of my somewhat newly rebuilt T-90. For about two months I had no leaks, and thought wow, I finally won...
Could someone post a picture of the inside of a 3A windshield, in the area of the vent? I have the vent and latch, but nothing for the...
Keep me posted on how you do, I have superlift springs on my willys with a spring-over and they are way stiff. I have also been considering some...
Well, I cut the shafts down and they mount up nice now. I would agree however, that the blades themselves leave a little to be desired. The...
Have any of you guys installed the electric wiper conversion kit from Krage JeepDoc on a Willys Jeep? I'm trying to mount them however, the...
Separate names with a comma.