I have an f134 that idles beautifully but as soon as you get on the gas is sputters and back fires along with going down the road. I was able to...
help me decide because I dont want to spend 1500$ for something I dont like. I am torn between 30x9.50 on stock wheels and stock ride height with...
I would love to know who makes back seat frames for the early cj5s. I cant seem to find one anywhere and I need one to complete my jeep. I have...
I need to put new brushes in the generator of my 12v delco on my 1960. should I got through that trouble or just replace it with a modern...
Would my 1960 f-134, 5.38s with OD and 235x85r16 cooper discoverer at3 on 16x6 cragar 69 wheels, black diamond 2.5in lift be exceptional on the...
can you still use the hard fuel lines with the weber carburetor and is a fuel pressure regulator necessary?
I have a no money limit but would like to keep the f134 because I already replaced everything around it. I plan to retain the original hard fuel...
would the pertronix II and 45k flamethrower coil (epoxy filled) work well on my f134 and what thermostat would you run with the f134 also because...
On my 1960 f134, I will be running 235x85r16 cooper discoverer at3 on a 2.5in bds lift and already know that I will be buying the cragar series 69...
I been thinking about the tsl radials 31x9.50r15. I heard the stories that people are getting 40k pavement miles out of them. Is this true?
I will more than likely be going to do refresh on my f134, would you recommend having the machine shop boring the f134 and getting oversized...
Would a non turbo carb 3.8l v6 adapt to the t90 tranny well if I would choose to install one in the far future. The reason is that I have the...
I keep debating whether or not to do an original restoration of a slight restomod to my 1960 willys. I will be keeping original drive line...
I cant seem to find any original seat brackets for my 1960 for the driver and the rear. I want to use the rugged ridge low back seat. I am...
My intent is to restore this jeep to original with a mild lift and a 31 or 32. the drive terrain is in great shape but I will be changing all the...
can 31x10.5 safely fit on these stock 15in wheels?
I want to run a 235/85r16 tire but I am unsure of what rim i should use. I want stability but I dont want it to surpass the fenders at all. I...
so I finally got my 1960 willys running decent after years of sitting. after a new carb, some tranny fluid in the cylinders to clean out, new...
do all dana 18 have a 29 tooth main shaft gear?
I just acquired a 1960 cj5 willys with f134 from my great grandfather who would like to see it reconditioned before he dies. I bought everything...
Separate names with a comma.