Welcome from a fellow '61 owner! Mine was all original as well, but I am doing the rebuild first before any serious driving time, but only because...
Walcks has a rebuild kit for the single action pump like used on CJ2s or any without vacuum. they are $45. Here's the description. I may try this...
Anybody home?
My '61 came to me as close to original as you could ever expect, but I'm wondering about the fuel pump. It is a single action (no vacuum) with the...
Looks good! I'm just starting on my '61. Before pulling the front end off, I noticed the same lean. The drivers side is lower, and after taking...
Here's a newer pic. [IMG]
I recently painted the grill of my TJ with bedliner, and noticed it looked more like an MB without the headlight trim. The lights are already set...
I had my TJ first, and spent hours pouring over jeepforum.com looking for projects. Now I have my Willys, and I hardly do any plotting on the TJ...
Jason, meant to mention when you posted pics on a thread of mine, that is one clean F!
I have several rolls of the cloth friction tape used on other vehicles. I thought about wrapping the harness with it. The wire that is damaged...
I've pulled the entire harness out of my'61, after a lot of pics, notes and labeling. I did not find any hack jobs in anything, and the only...
I was planning to use Fel-Pro or another brand name. Any suggestions? I'm not in a hurry, so no reason to skimp.
Thanks, guys. Didn't know if the block was threaded. Haven't had oneof these apart. Let the mayhem begin!
Thanks, Stout. What's the SAE thread/size of the bolts?
I'm getting ready to pull my F-134, and would like to know what size bolts to mount it to an engine stand. I figure they also need to be grade 8?...
Pics! [IMG] [IMG] Now all fixed up! [IMG]
This is the beginning of a new project for me, a '61 CJ-5 thats been sitting for about 12 years. While going through the mechanicals I decided to...
Separate names with a comma.