Anyone know what this carter would have went on?
Ok I'll try 2. just got the regulator hooked up, now just gotta put the carb back on.....
Ok, i took the carbs apart and they are clean as a whistle on the inside.....so now I assume its the fuel pressure. I know, from a previous post...
Just talked to the guy and he don't have doors, hinges, or the filler strips. He checked his connections for doors and could get a rough set for...
Here is the pic......the one on the left with the funny looking plunger is the carb in question. The model number on the new carb is 1899 and the...
Sweet! Thanks guys for your help!
Hey guys, I made a major parts score yesterday and one of the items I picked up was a NOS Carter YF carb. Only thing is that is slightly...
Are the filler pieces mounted to the side of the windshield and are a part of the door mount as well or do they go on top of the windshield?
Where are these hinges located?
I've got a lead on a hardtop, and I know they're getting harder to find but I don't know what kind this is. The current owner did say that it was...
I used a long hook pick, a flathead screwdriver, and a flashlight in my mouth, upside down! I just pulled the floor pans, and the inspection...
Cheap and easy! lol. I'm just kicking around ways to make my Jeep as efficient and updated as possible. Cost is definitely a concern now, as I...
hey guys, I was reading some REALLY old posts from '05 and was wondering if y'all are still having good luck with the megasquirt systems. I...
Well, I've got that Carter and a Solex. I've got the solex on there right now cause it seems to run a little better than the carter (and its...
No, I just have a regular fuel pump for use without the vacuum wipers. The fuel pressure is good, I just found a lot of sediment in the fuel pump...
Any way to clean out that carb without taking it apart? I don't even know if I can get gaskets for a solex.......
Ok, I've got an update. I checked the filler screen on the fuel pump and noticed some trash. I cleaned what I could out, installed a small inline...
Sweet! thanks!
Thanks guys.....I'm going to try to reduce the fuel pressure maybe by using an inline regulator. Good tip about the return line, I'll check that...
Sorry for the thread revival but..... I bought a roll bar like the one in the first picture of this post and it sits a little higher than the...
Separate names with a comma.