I was running through the woods the other day in my old beater and had to back up after running over some small trees. Wouldn't you know, I...
Problem solved: Took it down to my uncles today and it wouldn't skip for anything... I rode around for a bit and sure enough it started. Took...
Solex is adjusted properly. I'll make sure of the fuel/water. I'll check the timing (HOW?). As for vacuum hoses. I don't think there is a...
We haven't "completely" resolved this, but we brought a qualified mechanic over and he thinks it is probably a burnt valve. You can hardly tell a...
Yeah, it could have water in the fuel tank (this is probably the problem). I try to drain the tank that holds 11 gallons (without crying - - $40...
I have a 68 CJ-5 with the F-Head 134 engine. It has a new Solex carb and has points ignition. Last I checked it had good compression... It...
My dad bought an old beater of a CJ-3B and has done ALOT of work to it. He actually has it looking really good and it runs fairly well, although...
Thank you Old Bill. I took your advice and fixed it yesterday. It was relatively quick and painless... and I don't sound like an old "pulp wood"...
I have a 1968 Jeep Cj-5 with the F-134 engine. The pipe has came completely off of the exaust manifold. What is the best way to re-attach...
yeah, I couldn't get the sight to work either. I may just take it by there next week if there is nothing ya'll can think of for me to try first.
A cruiser buddy of mine said that it could just be full of dirt. What makes the gear "pop-out"? I've never been in one and am pretty much...
My Jeep quit starting the other day, so I took the starter off. I hooked it up to the battery and it is turning over, but not engaging...
I posted a poll to get everyone's opinion of the matter... Thank ya'll! NitroSteel
What front end should be under the front end of my stock 68-69 CJ-5? I am looking into getting some locking hubs. Thank ya'll NitroSteel
I don't have locking hubs on the front axle, so I guess I need to add those... I honestly like not having them, because I never have to worry...
I'm getting mixed reviews about welding the rear. What are my options as far as lockers go? What brand, who to get it from, cost? What do the...
I've about got my "free" 68 CJ-5 running the way I want it. One of my Landcruiser buddies and I went riding the other day and of course he had...
I don't have one of the passenger side, but here is a good one of the grille.
If there's anything I can tell you about it to make it easier - - please let me know. Thanks again... NitroSteel
I am getting ready to order some parts for a Willy's Jeep that my uncle is working on. Attached are pictures of it, can ya'll tell me...
Separate names with a comma.