Thanks for the info. I plan on going through it today and making a check list. I realize it is a project, but I have a space in my garage for it...
Hey guys, Been a while but I am back. I picked up a 69 commando with the v6. Got a few questions 1. The steering wanders horribly. What is...
I have a new carb and fuel pump to help with the heep and some of the idling problems. the fuel pump should be bolt and play right? now comes...
ok here is what i have and the final few questions before i make the first trip to the parts store. I plan on doing the master cyl and rear first,...
change your oil... and watch to see how much water drains out first. probably a head gasket(like already mentioned) but i had the problem on...
Just looking for a writeup or parts list for the rear. right now i have the following for a parts list. Caliper bracket form the front of a 72...
yeah, but i was looking at the all Jeep swap... I have read, printed, studied, and reread that article...it is probably what i am going to do...
I am about to do this swap that is why i need a pretty percise list. Thanks I plan on doing the rear as well. Do you have a ball park cost? Tommy
so if i wanted to do the same swap i could just go ask for what from a 77 CJ I am looking for a list to print off so i don't miss anything,...
Couldn't find the article on pirate...will a corvette MC mount to the frame? Tommy
Great, so the writeup on the front in the tech section has all my info and good pics...any one have the same for a rear swap... the budget cash...
I think you need teh 1"1/8 rotors...but i am not sure and would like to know the same info Tommy
http://www.film.queensu.ca/CJ3B/Tech/DiskBrakes.html Is that better than using all different parts??? it really doesn't matter to me but i would...
never thought about mounting to the seat frame or steering column...do you guys have any pics....mine is also a small Radio shack special so it...
Tumble Weed...is that all i need? what else would go on that list? about how much did your budget run on that if you don't mind me asking....
Does anyone offer a kit for a D27 and D44 disc swap? i know i can piece it together but i didn't know if anyone had a kit with little fabbing...i...
any of you have a rather unique CB mounting location? I got a new one and i have a .50 cal ammo can and thought it could mount down in it...
I love the big steering wheel...it was one of the reasons i picked a ECJ5. thanks for the tips guys. Tommy
yeah, my 31's slicks turn pretty easy...didn't know if the added size and aggressivness would roughen it up alot. Tommy
2.5 with 32's will work. how rough will the 32 mud Terrains be with the manual ross steering? 31's aren't too bad...it actually feels like...
Separate names with a comma.