Maxx Sorry for delay I just read this tonight .... I will snap some pics Sunday and get em posted if ya still need em.
I got a 28 inch trukool from Speedway (160.00 )and it works great, without a thermostat I can't get it to over 155 degrees....
[ I've been running the nylon with great success for 15 years now with no problems. But don't let it get near a heat source! I have been...
Drive shaft does exit on the passanger side. Well the D18 work with the sm465 I mentioned in the first post without any major headaches? Thanks...
I have no idea hwat transfer case I have.... about the only thing I know about it is it's a twin stick.
Mike I am in Houston and once I pull it out you come get it and it is yours for free... well bring a six pack! lol It still works it just jumps...
what type of modifications will I need to do if any ... have the drive shaft cut, etc... ?
The muncie 4 speed finally bit the dust in my 66 CJ5 with a chevy 350. I wanted to get rid of the side linkage and go with a top loader anyway...
I live on the far south side of Houston almost to Galveston, the place we went that day is south of Alvin on the banks of Chocolate Bayou it's a...
"A (wench) can be a whole lot of trouble, but a (winch) can get you out of trouble." oppps.... one gets ya into tight spots and the other gets ya...
It was a blast and a great first adventure! The log got caught up between the frame and the axle so when moving forward the other end of it was...
my jeep will not go through anything! http://www.picturetrail.com/gallery/view?p=999&gid=6232525&uid=543463
Once again thanks all. I will drive it till it quits! I think I got teh profile filled in right this time, last time I tried it I guess i...
OK I guess my questions will never end.... while draining the transfer case, diff's and tranny I figured I would do some research and figure out...
Well once again yall came through for me.. THANK YOU. No wonder the po didn't have the tach wired in! lol
I pulled the tach out and there is nothing to set, the only thing there is a choice between hooking it up 6v or 12 volt so I imagine that is teh...
Thanks all for the help, below is what I know .. or don't know at this time! 1. gear ratio ... I have no idea but I am pulling the covers off...
Ok another probably stupid question from one of the new guys. 66 cj5, 350 chevy, 4 speed tranny Should I really be doing 5100 rpm's at 55 mph...
After yesterday I think I am going with a 32 gallon fuel cell mounted in the bed. Took the Beast off road yesterday for the first time and ended...
If the 78 model will fit I will gladly use one.... how many gallons did the 78 hold?
Separate names with a comma.