Ross, I'm also interested. I have a CJ6, V6, SM420 and D18. Same as you. Post some photos. You are two steps ahead of me. I'd really like to...
Dan, I have one in my YJ. I really like it. Very good construction. I put my CB in the radio slot. Get the cup holders. Mine hold really big...
I'm in the process of ordering one of these right now. I haven't seen it yet so I can't say how easy it is to install. I've had dealings with...
I have a twin stick D18 to install. It was attached to the SM420 to D18 adapter when I bought it. The guy I bought it from didn't need the D18...
I just pulled a T15 and D18 from my CJ6. The T15 is not original, it has an adapter plate to mate it to my 225 V6 bell housing. Here is a photo...
Consider 5.38s. Even though 5.13s look good on paper, you might wish you had the extra low gearing to overcome the extra mass of those larger...
The frame on my 67 CJ6 is strapped. It looks like it came that way from the factory. The front end looks like it was partially boxed at the...
I'm planing to do it myself, with some help from my friends. I've participated in swapping axles before. It doesn't seem too hard. I'm going to...
I'm thinking of going up 2". I wonder at what point the pedals will see too low. I'm a long way from putting my tub back on. I removed the old...
I already have a set of D44s from a 78 Wagoneer waiting to be installed. Disc brakes up front. Real parking brakes out back. I'm planing on...
If I add a body lift, what do I do with the frame mounted pedals. I'm not interested in converting to swinging pedals. Do I raise the pedal...
I agree, just do it. I pulled my 67 CJ6 tub just 2 weeks ago. I had never done it before so I had the same questions you do. I had 5 guys total....
The dual shocks were added by a PO because he thought they looked cool. One was missing. They're gone now. I did not think to powerwash the...
Funny you should mention it. Check out http://www.pbase.com/scottbruns/jeep_cj6 I just uploaded some new photos. I'll take many more as I pull...
Thanks for the tips. Looks like this is easier to do than I thought it would be. I already have everything disconnected. The driveshafts have...
I guess I figured the back of the motor would weigh a lot. I guess I'm wrong. Scott
I forgot to mention that the tub is off. I'm not using a lift. All 4 wheels are still on the ground. Scott
I've stripped everything else off my CJ6 and it is now time to remove the transmission and transfer case. Since I've never done this before I...
I see what I was doing wrong. I was using the search at the top of the page. Once I found the forum search I was able to find lots of references...
Mike, Yeah, that's it. I was looking for info on Holbrook Long Leafs. They seem like an interesting lift. Long leafs, a long Jeep. Seems like...
Separate names with a comma.