Its best to use a low temp solder 50/50 (lead/tin) and use muric acid to clean
Hello I don`t have the part no for the filters right off but i can get them my local napa acutally sourced them. I have the perkins repair...
The alt. is a 12si delco remy unit it can be converted to 1 wire but I used 3 and the indicator (idiot) light My engine has really low rpm...
thanks cjmac I will try that, my wiring under dash is a ball of spagetti I just replaced my externally regulator alt. with a 12si unit so I...
Hello. I connected my multimeter in series from the positive bat terminal to cable connector and says I have 3.5 ma flow on the 200ma range....
Hi Zunk`sTux I have the perkins 4.192
The injector pump gets pretty warm and the parts have very strict tolerances the cold water stopped the one in my jeep dead broke. a small shaft...
some pros and cons of the perkins jeep. the top speed for my jeep is 50mph It can chug up a 40 degree incline pulling a trailer with 2/3cord...
I have a 1964 cj5 with the perkins lots of starter problems right now
I use both these benders regularly the 180 degree benders are real slick and will work on thin wall tube I use them on soft copper and they are...
Thanks william , the 10 -15 degee difference I`m referring to is with the perchs that the springs sit on, not in the camber. sorry for the...
I replaced my gear damaged dana 25 with a 27 that I bought from a guy who rolled his jeep. I noticed that the spring perchs are not on the same...
vernco.com is a jeep site with info on this good luck
The system is negative ground. 6 months back when I replaced the solenoid I had a bench test done by a starter repair shop they simply got it...
Thanks for the suggestions. I replaced the ground wire and cleaned all connections there. I also put new brass bushings in the starter (filled the...
Hello group; long time since my last post, but I read this great forum regularly. I have a problem with my starter It is a british made lucas...
Separate names with a comma.