greaseable spring bolts

Are they worth trhe money or not. When I installed my 2 1/2 lift 5 years ago I just reused the bolts that were in it. I've now taken it completely apart to fix some body rot, so I figured I would replace some other stuff that was questionable. I,ve seen them for 60 bucks a set, but damn thats a lot for bolts. Opinions?

 

I like greaseable bolts, but I make my own.

Simply chuck the BOLT up in a drill press,
Mount the DRILL in the vice, and the bolt becomes self centering.
Don't drill any deeper than your outlet hole, and keep the primary hole as small as possible and you will be fine.

This is one of the few times I use 'Press In' grease Zerks instead of thread in.
If a press in gets knocked off, I simply replace the entire bolt instead of trying to fish out the tail of the press in...

 

Here you go...

http://www.jeepforum.com/forum/f8/homemade-greasable-bolts-892723/

Rich

 

They make mainenance a lot easier. otherwise you have to remove the bolts to grease them.