1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

73 CJ5 Bumpers

Discussion in 'Intermediate CJ-5/6/7/8' started by sailormike, Jun 24, 2009.

  1. sailormike

    sailormike New Member

    I need a new front and rear bumper for a 73 CJ5 anyone know where I can find some nice aftermarket ones. All I can seem to find are 76 and newer. Thanks for your help.
     
    sailormike, Jun 24, 2009
    #1
  2. featured

    featured Member

    I think we are seriously limited on aftermarket for our Jeeps. I have been looking through all the common catalogs with little luck. I will probably build my own bumpers out of either boxes tubing or this aluminum channel I have. I was thinking about just hacking it off to the width of the front frame rails and boxing the ends to clean it up, and not adding 40 pounds with a large steel monstrosity.
     
    featured, Jun 24, 2009
    #2
  3. sailormike

    sailormike New Member

    Ok let me try this then. Is there anyone on here that could fab me one for a decent price?
     
    sailormike, Jun 24, 2009
    #3
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Cross enterprises makes bumpers for early CJs: http://www.crossenterprises.com/cjyjtj.html

    A reproduction factory front bumper is available from many retailers.

    Jeep offered chrome front and rear bumpers with the Intermediate Jeeps. They are out there but scarce in good condition.

    The factory draw bar provides a rear bumper of sorts. You can also get rear bumperettes that will fit on intermediates.

    There was a factory step bumper available for the Intermediate CJ.

    Quite true - there's not a lot of aftermarket support for Intermediate Jeeps.
     
    Last edited: Jun 25, 2009
    timgr, Jun 25, 2009
    #4
  5. sailormike

    sailormike New Member


    Thanks for the site, I like there rear bumpers. Anyone ever deal with them on here?
     
    sailormike, Jun 25, 2009
    #5
  6. nwedgar

    nwedgar Now with TBI!

    I was under the impression that the intermediate front bumper frame horns are the same as the 76+ CJ's...it is the rear that changed and therefore not compatible.
     
    nwedgar, Jun 25, 2009
    #6
  7. nickmil

    nickmil In mothballs.

    Intermediates are the same as '71 and older. They are the same spread as the '76 and up but not sure if the bolt up is the same or not. Hopefully someone else can chime in on that part. The rear is definitely different.
     
    nickmil, Jun 25, 2009
    #7
  8. ConstantJoy

    ConstantJoy New Member

    Try Eddie at Ground Pounder Fab. He has an Ebay store front but will make anything you want / need finished or unfinished, at a decent price. Do a google search and see some of the pics over on jeepforum. Everyone seems to rave about his products. He's a Jeep fanatic and takes pride in his work.
    http://stores.ebay.com/Ground-Pounder-Fab
     
    ConstantJoy, Jun 25, 2009
    #8
  9. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    I'll second Eddie at Groundpounder Fab.
    Great work, great prices.


    And I'll say the same for Jeremy at Cassidy's Customs:
    http://www.cassidyscustom.com/bumpers.html


    A to Z Fab is well respected too:
    http://www.atozfabrication.com/store/home.php

    I've spoken at length with the owners of each of these shops.
    I run Cassidy's and Groundpounder stuff on my rig.

    These are all mid-Atlantic region builders. Where are you located?
    Two of the three will be at the PA Jeeps show in York PA July 18 - 19...
    :tea:
     
    lynn, Jun 26, 2009
    #9
  10. sailormike

    sailormike New Member

    I live in Nevada, thanks everyone for the help.
     
    sailormike, Jun 26, 2009
    #10