1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Time to Play "What is it?"

Discussion in 'Builds and Fabricators Forum' started by hudsonhawk, Oct 27, 2008.

  1. Oct 27, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Its the first installment of what is that Crazy Texan up to now....

    What could this be?
     
    hudsonhawk, Oct 27, 2008
    #1
  2. Oct 27, 2008
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    1 leg of a shop table that is upsidedown.... or a form/jig for something
     
    cj6/442, Oct 27, 2008
    #2
  3. Oct 27, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Close but not quite.
     
    hudsonhawk, Oct 27, 2008
    #3
  4. Oct 27, 2008
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    log splitter
     
    cj5 buggy, Oct 27, 2008
    #4
  5. Oct 27, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Nope but that give me a good idea for my next project. :)
     
    hudsonhawk, Oct 27, 2008
    #5
  6. Oct 27, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    new hint...
    [​IMG]
     
    hudsonhawk, Oct 27, 2008
    #6
  7. Oct 27, 2008
    sammy

    sammy Coca-Cola?

    Albuquerque, NM
    Joined:
    Jul 1, 2007
    Messages:
    1,577
    Quench bucket holder on welding table? Foot pedal stand for TIG?
    Cow catcher?
     
    sammy, Oct 27, 2008
    #7
  8. Oct 27, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Very close. Its actually the bottom holder for the welding bottle. I still have to figure out how to make a latching top to secure it to the table so it can't fall over. I am actually bulding a mobile welding station so I can push it off into the corner when I am not using it. Everything I need will be on or under the table for easy access.

    [​IMG]
    [​IMG]
    [​IMG]
     
    hudsonhawk, Oct 27, 2008
    #8
  9. Oct 27, 2008
    Grinsha

    Grinsha minimally sufficient

    Montana
    Joined:
    Nov 11, 2003
    Messages:
    107
    A Piece of motorcycle chain might make a good upper holder. Just knock one of the pins out and drop a nail through it to keep it secure. Or weld a washer to one side and a nut to the other and secure it with a bolt.

    RSN
     
    Grinsha, Oct 27, 2008
    #9
  10. Oct 27, 2008
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Nice welding table. Looks really sturdy. Very unique bottle holder. Three dimensional thinkers make better than average fabricators. Keep on building!
     
    Posimoto, Oct 27, 2008
    #10
  11. Oct 28, 2008
    Fnord5

    Fnord5 El Jeepo Gigantico!

    Sacramento...
    Joined:
    Aug 31, 2007
    Messages:
    177
    use one of these for the top bracket, or something home-fabbed
    [​IMG]
     
    Fnord5, Oct 28, 2008
    #11
  12. Oct 30, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,939
    Picked up the top today. 1/2"x34"x50" with a 12"x12" cut out for a plasma grid. :rofl:

    [​IMG]
     
    hudsonhawk, Oct 30, 2008
    #12
  13. Oct 30, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Very nice!
    On my torch cart I used a piece of leftover chain and a small turn buckle. Can easily be adjusted for different tanks and absolutely does not allow the tank to move when tightened up. Won't catch on fire either:)
     
    nickmil, Oct 30, 2008
    #13
  14. Nov 15, 2008
    Psychojeeper

    Psychojeeper Aint 'sposed to be pretty

    Las Cruces, New...
    Joined:
    Nov 15, 2005
    Messages:
    368
    Looks like that design would work great as a mount for a PowerTank/C02 Tank. I built my own C02 system years ago,,great for tire filling & fixing popped beads on the trail.
     
    Psychojeeper, Nov 15, 2008
    #14
  15. Nov 15, 2008
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Dang. Now that's a welding table!
    <Borat Voice>Very nice.</Borat Voice>
     
    jayhawkclint, Nov 15, 2008
    #15
  16. Nov 26, 2008
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    526
    Last edited: Nov 26, 2008
    48cj2a, Nov 26, 2008
    #16
New Posts