1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Any USA clutch options?

Discussion in 'Flat Fender Tech' started by MC21609, Aug 27, 2008.

  1. Aug 27, 2008
    MC21609

    MC21609 New Member

    Lower Suwanee, GA
    Joined:
    Aug 19, 2007
    Messages:
    41
    Anyone know of a "made in the USA" clutch for my flatty? I hate to put a Chinese made clutch in it.

    :flag:

    Thanks,
    David
     
    MC21609, Aug 27, 2008
    #1
  2. Aug 27, 2008
    Andy4802

    Andy4802 Canadian Jeep junkie

    Hudson, Qc, Canada
    Joined:
    Jul 30, 2006
    Messages:
    410
    try Kaiser Willys or Northstar Willys
     
    Andy4802, Aug 27, 2008
    #2
  3. Aug 27, 2008
    MC21609

    MC21609 New Member

    Lower Suwanee, GA
    Joined:
    Aug 19, 2007
    Messages:
    41
    Thanks for the suggestions, but Kaiser confirmed theirs are made in China and Northstar wasn't sure where theirs were made.

    Perfection (parent company of Zoom racing clutches) sells the same Chinese disk and Japanese pressure plate under part number MU5317-1 or Brute Power 90438. I think I saw these same part numbers at NAPA.
     
    MC21609, Aug 27, 2008
    #3
  4. Aug 27, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Have a local rebuilder refresh your clutch, then it's definitely a USA product. Mcruff posted the name of a place recently that he uses.
     
    timgr, Aug 27, 2008
    #4
  5. Aug 27, 2008
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    I believe Herm uses a local rebuilder.
     
    Vanguard, Aug 27, 2008
    #5
  6. Aug 27, 2008
    Bill F

    Bill F Finally running

    Hillsboro NH
    Joined:
    Sep 22, 2002
    Messages:
    588
    check midwestmil.com
     
    Bill F, Aug 27, 2008
    #6
  7. Aug 27, 2008
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I believe he uses Otts Friction supply in Portland, OR...
    I don't have the contact info but with a search I bet you could find it.
     
    nickmil, Aug 27, 2008
    #7
New Posts