1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Paint and trim decal size

Discussion in 'Early CJ5 and CJ6 Tech' started by jwnorsk, Sep 19, 2007.

  1. Sep 19, 2007
    jwnorsk

    jwnorsk New Member

    Norway
    Joined:
    Aug 16, 2006
    Messages:
    27
    I am trying to recreate my trim and paint decal for my 72 cj 5 and was wondering if anyone can tell me the dimensions on the decal. I understand this decal was used on the cj5 from 70 to 73.

    I hope someone can help
     
  2. Sep 19, 2007
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    the paint/trim on my 70 was not a decal but a piece of 3/4 " wide aluminum tape with the 2 number codes pressed into it. stuck on the firewall above the battery. hope that helps
     
  3. Sep 19, 2007
    jwnorsk

    jwnorsk New Member

    Norway
    Joined:
    Aug 16, 2006
    Messages:
    27
    Thats what I am looking for I need to know the actual size.
     
  4. Sep 19, 2007
    jwnorsk

    jwnorsk New Member

    Norway
    Joined:
    Aug 16, 2006
    Messages:
    27
    also are the numbers stamped in or raised i.e stamped from behind?
     
  5. Sep 19, 2007
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    raised numbers (stamped from behind). I will try to get a pic of it when I get home
     
  6. Sep 19, 2007
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    I cannot get a decent picture of it

    dimentions 2-1/4 inch long by 11/16 inch wide .010 inch thick aluminum
    the numbers are 3/16 by 1/8 inch block, pressed in from the back. they are stamped with the bottom of the number 1/16 above the bottom of the plate. the first number starts 1/2 inch from the left side of the plate, the second number starts 1-5/8 inch from the left side of the plate when viewed from the front.

    it was mounted at an angle on the firewall about 2 inches above the center of my battery, it was covered with undercoating and very hard to find.

    Hope that helps

    good luck with reproducing it
     
  7. Sep 19, 2007
    WYOMIKE

    WYOMIKE Oct 1971 pic

    Parkman, Wyoming
    Joined:
    Jan 22, 2003
    Messages:
    685
    I made some for myself and some of the guys a while back. I might have some blanks left if you can't get one made, let me know the codes and I can punch it out for you. Mine are not quite like the original as I had to punch from the front, not the back. You will have to have a reverse set of punches to punch from the back.:coffee:

    View attachment 19680
     
  8. Sep 20, 2007
    jwnorsk

    jwnorsk New Member

    Norway
    Joined:
    Aug 16, 2006
    Messages:
    27
    Thanks everyone for the help, WYOMIKE I saw your directions from on a post from last year and I am trying to make my own your directions were great and I think I have it right the metal tape was hard to find here in Norway but I found the tape you use to fix holes in your muffler, I assume thats about the same as you used. I was able to print them and I am going to try and stamp it today, If this does not work out I may need to take you up on your offer.
     
New Posts