1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T98 Rebuild

Discussion in 'Early CJ5 and CJ6 Tech' started by fatty, Mar 16, 2007.

  1. Mar 16, 2007
    fatty

    fatty New Member

    Papillion, NE
    Joined:
    Sep 21, 2002
    Messages:
    32
    My tranny keeps falling out of 3rd when I let off the gas. Does anyone know where I can find (buy or borrow) a good T98 service manual? I have the Jeep CJ Rebuilder's Manual but the T98 section isn't very detailed. I really don't want to spend $350(lowest quote here in Spokane) just in labor. Any help would be greatly appreciated.
     
    fatty, Mar 16, 2007
    #1
  2. Mar 16, 2007
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    I believe the factory service manual has the 4 speed in it
    get a copy of the ECJ5 service manual
     
    jpflat2a, Mar 16, 2007
    #2
  3. Mar 16, 2007
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    :iagree:
    Too bad you're not closer. I only charge $100 labor to go through them. That's if it's out of the vehicle though. Nickmil
     
    nickmil, Mar 16, 2007
    #3
  4. Mar 16, 2007
    nrg0920

    nrg0920 New Member

    Raleigh, NC
    Joined:
    Feb 1, 2007
    Messages:
    38
    Get in touch with Herm the Overdirve Guy, I know he rebuilds a lot of differnt Jeep tranny's, and only charges around $100 for labor. He is located in Brush Prairie, WA...not sure how close that is to you.
     
    nrg0920, Mar 16, 2007
    #4
  5. Mar 16, 2007
    fatty

    fatty New Member

    Papillion, NE
    Joined:
    Sep 21, 2002
    Messages:
    32
    I might be willing to drive to Portland...If it won't take longer than a weekend.
     
    fatty, Mar 16, 2007
    #5
New Posts