1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Offset Dana 44 rear axles

Discussion in 'Early CJ5 and CJ6 Tech' started by skvetter, Sep 17, 2006.

  1. Sep 17, 2006
    skvetter

    skvetter New Member

    Shreveport, LA
    Joined:
    Jul 10, 2006
    Messages:
    13
    Hey guys, I have a 1971 offset Dana 44 rear end that I'm trying to get new shafts. But after doing numerous google searches I seem not to be able to find a place that sells new shafts. They all start with 1972 Dana 44 center axle. Can any one tell me where I can find these shafts?

    Thanks ahead of time.:)
     
    skvetter, Sep 17, 2006
    #1
  2. Sep 17, 2006
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    They are not available for the offset axles anymore, at least not as a stock item. These people can make them for you,;http://www.dutchmanms.com/4_axles.html
    There is also another company that does it, can't remember who right off the bat though!
     
    Mcruff, Sep 17, 2006
    #2
  3. Sep 18, 2006
    Renegade II

    Renegade II 71 Renegade II

    Frankenmuth,...
    Joined:
    Aug 28, 2006
    Messages:
    20
    Renegade II, Sep 18, 2006
    #3
  4. Sep 18, 2006
    BlueFlu

    BlueFlu past owner of some ecj5's

    Hermitage, TN
    Joined:
    Jan 21, 2004
    Messages:
    1,552
    BlueFlu, Sep 18, 2006
    #4
  5. Sep 18, 2006
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    might try Mile High Jeep in Denver. They have come through with a lot of oddball stuff for me in the past.
     
    66cj5, Sep 18, 2006
    #5
  6. Sep 18, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If you're going to have axles made, why not go full-floater?
     
    timgr, Sep 18, 2006
    #6
  7. Sep 18, 2006
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Last time I was up at R&P they had some shafts for that axle that they had made. They took longer axles and them re-splined. You might give them a call at 503-557-8911. Nickmil
     
    nickmil, Sep 18, 2006
    #7
New Posts