1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Towing a Jeep W/T90 & Spicer 18

Discussion in 'Early CJ5 and CJ6 Tech' started by gibson-d@sbcglobal.net, Feb 13, 2013.

  1. Feb 13, 2013
    gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Houston, TX
    Joined:
    Feb 11, 2007
    Messages:
    93
    What do I do to flat tow a Jeep equipped with a T90 and Spicer T/C? Both in N, trans in N or t/c in N?
     
    gibson-d@sbcglobal.net, Feb 13, 2013
    #1
  2. Feb 13, 2013
    brunester

    brunester Member

    Santa Cruz Ca.
    Joined:
    Aug 4, 2011
    Messages:
    97
    I would just take off the drive shafts.
    But if you dont, put it in gear so it lubes itself as it goes.

    Also, there are a ton of threads on this, so a search might turn up more info
     
    brunester, Feb 13, 2013
    #2
  3. Feb 13, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Trailer is best obviously but if that is not an option pull driveshafts like Brunester said. If for some reason that is not an option, make sure all gear boxes are full of fluid, transmission in gear, transfer case in neutral.

    Like Brunester said you can also do a search for "flat towing". LOTS of discussion there.
     
    nickmil, Feb 13, 2013
    #3
  4. Feb 14, 2013
    gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Houston, TX
    Joined:
    Feb 11, 2007
    Messages:
    93
    Thanks guys, will do a search
     
    gibson-d@sbcglobal.net, Feb 14, 2013
    #4
New Posts