1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Chevy bracket for hydraulic slave cylinder

Discussion in 'Builds and Fabricators Forum' started by Daryl, Jun 24, 2012.

  1. Daryl

    Daryl Sponsor

    I took some pics of how I put a slave onto a Chevy bell.

    [​IMG]

    [​IMG]

    [​IMG]
     
    Daryl, Jun 24, 2012
    #1
  2. nickmil

    nickmil In mothballs.

    Looks good Daryl! Is that the '80's CJ 4 cylinder slave cylinder?


    Sent from my iPhone using Tapatalk
     
    nickmil, Jun 25, 2012
    #2
  3. Daryl

    Daryl Sponsor

    Yes. Ask for a 84 CJ7 with a 4 cylinder and you will find the part. The Ford bracket is almost the same, but I dont work on Ford stuff...
     
    Daryl, Jun 25, 2012
    #3
  4. GreenGhost

    GreenGhost Never give up!

    Do you think this design could be effectively applied to Buick bell housings as well?
     
    GreenGhost, Dec 16, 2012
    #4
  5. scott milliner

    scott milliner Master Fabricator

    Wow. You were able to make it out of flat plate?

    Here's my design.
    [​IMG][/IMG]
     
    scott milliner, Dec 16, 2012
    #5
  6. duffer

    duffer Rodent Power

    Last version I made for my 3B is a flat plate also and on the same bell mounting as Daryl's

    [​IMG]
     
    duffer, Dec 16, 2012
    #6
  7. oddfirejeeper

    oddfirejeeper Active Member

    fantastic work fellas
     
    oddfirejeeper, Dec 16, 2012
    #7