1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another T/C question

Discussion in 'Early CJ5 and CJ6 Tech' started by SandhillMike, Dec 9, 2004.

  1. SandhillMike

    SandhillMike Moderator

    I'm going to have an OD on the D18 for my 66. Is it possible to mount a PTO also with the OD in place?
     
  2. kamel

    kamel Senior Curmudgeon

    Yes.

    You might be able to find a used one around, but you can get a new one from Herm the overdrive guy.

    He bought the rights and prints and tooling to make these things, so he is the only source for new.

    You basically take the rear housing off of the overdrive and bolt the adapter on to the rear of the overdrive.

    You'll have to modify PTO drive shaft lengths, but you probably figured that out already.

    good luck
     
  3. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

  4. SandhillMike

    SandhillMike Moderator

    Thanks Guys. Looks like it will be a little more than I want to spend for something that will be used rarely. :(
     
  5. nickmil

    nickmil In mothballs.

    Keep your eyes open on Willystech, E-bay, etc. Sometimes the adapter and drive gear come up used for a lot less money. You might contact Herm and find out if he has any used set ups around. He sometimes does. Nickmil.