1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Rod removal

Discussion in 'Early CJ5 and CJ6 Tech' started by tgregg, Jun 25, 2005.

  1. tgregg

    tgregg Member

    They rod that runs from the frame where it is bolted to the transfer case where it fits over some kind of nipple. I can't find any help on removing it. I unbolted the frame end braket but can't see how the T/C end comes loose. Any help?
    Also what is the opinion on the Advance Adapter clutch linkage upgrade?
     
    tgregg, Jun 25, 2005
    #1
  2. lafester

    lafester Sponsor

    if i remember correctly you have to remove the tcase bolt also. be sure to drain the tcase first cause that bolt goes all the way through.

    i like my aa clutch linkage... only way to go other then hydrolic.

    chris
     
    lafester, Jun 25, 2005
    #2
  3. sparky

    sparky Sandgroper Staff Member Founder

    Not really...
     
    sparky, Jun 25, 2005
    #3
  4. Patrick

    Patrick Super Moderator Staff Member

    Patrick, Jun 25, 2005
    #4