d 27 high steer

hey does anyone have some good ideas for a high steering knuckle on a dana 27? i have already checked out some plans i found here, but just wondering how some of you guys did it with a spring over
any ideas will be great

 

I thought about it for a while, I was going to make an arm from the 4 bolts on the top trunion and use a long bolt and bushig to tie it to the factory arm for strength. Obviously I would have milled the top of the trunion flat. Instead I just made my tie rod from 1.5" .250 wall DOM.. yeah like I'll bend that...


BUBBA

 

The drivers side steering arm from a truck/wagon D27 will bolt onto the passenger side of the CJ D27 - in place of the upper trunion.

Warning: This information is old. I researched this a looooong time ago. I'm only about 95% sure it's correct.

 

thanks for the info it has given me some ideas to think about

 

I may have one of the D27 steering arms from a wagon that is part of the upper trunion. If interested email or pm me.

Tiptop

 

if you E-mail me at brokenwillys@aol.com i have some realy good pictures of what i did on my 57, jason.

 

Have you seen mine?

 

I like the looks of the one you've got a picture of how did you make it

 

You realize the last post you replied to is from 2005?

 

ya it looked like somthing i could use though