1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Valve Cover Torque Spec.

Discussion in 'Intermediate CJ-5/6/7/8' started by zila, Oct 20, 2020.

  1. zila

    zila I throw poop

    Replacing the OEM 50 year old leaking valve cover gaskets. I have searched the interweb and cannot find a definitive torque spec. 50 inch pounds has come up a few times and a lot of just crank er down with a 1/4" nut driver till tight. Anyone in the know?
     
    Last edited: Oct 20, 2020
    zila, Oct 20, 2020
    #1
  2. 73 cj5

    73 cj5 Not ready for the junkyard yet

    50-inch pounds
     
    73 cj5, Oct 20, 2020
    #2
    zila likes this.
  3. zila

    zila I throw poop

    Thanks. I'm on it.
     
    zila, Oct 20, 2020
    #3
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Yep, use a nut driver. I would guess that's in the range of 50 in-lbs.
     
    timgr, Oct 20, 2020
    #4
  5. zila

    zila I throw poop

    I used a inch/lb torque wrench and 1/4" drive. 50 Inch/lbs aint much. Pass side done. PITA. Driver side tomorrow maybe..
     
    zila, Oct 20, 2020
    #5