1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless 225 V-6 Distributor

Discussion in 'Early CJ5 and CJ6 Tech' started by Jeremy Knakmuhs, Mar 5, 2019.

Page 3 of 3
  1. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    You don't use a ballast resistor with HEI. Plug wires should be 8MM due high energy spark. The coil is a specific coil for the HEI cap. Coil needs to be buick odd fire specific. HTH
     
    Walt Couch, Oct 2, 2020
    #41
    47v6 likes this.
  2. Greenshirt82

    Greenshirt82 The Old Girl - '69 CJ5

    Thanks, Walt.

    So I can bypass the resister, but I’ll need a new coil and wires. I presume I can use the coil And wires for the ‘75 Skylark.

    Tim
     
    Greenshirt82, Oct 2, 2020
    #42
  3. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Yes.
     
    Walt Couch, Oct 2, 2020
    #43
  4. Deaner70

    Deaner70 Member

    coil is in the cap
     
    Deaner70, Oct 5, 2020
    #44
  5. Greenshirt82

    Greenshirt82 The Old Girl - '69 CJ5

    Thanks. I figured that part out as I was doing a deep dive on the installation pages. On the autozone pages the pics were of a square coil and when I got on a proper computer with a good monitor I could see the cap properly with an obvious place for the coil. Aha moment...

    Ordered all 3 Friday, should be here Thursday, hope to have my Jeep on the road Friday.

    Tim
     
    Greenshirt82, Oct 5, 2020
    #45
Page 3 of 3