Dauntless To Ford T18 Clutch

I swapped a ford t18 into my jeep almost ten years ago. Ive since aquired a nicer “puffed up” dauntless i am about to install. I wanted to do it tonight but i think it makes sense to replace the clutch disk and throw out bearing. Cant for the life off me remember what year ford pick up i bought this tranny out of. I would like to buy at napa but they are looking at me like i have three heads with my request. Conveniently, clutch disks dont have part numbers on them. Im at the point where im just gonna put the old stuff back in. Anyone have part numbers for a ford borg warner 10.5 “ 10 spline clutch disc and a 69 dauntless v6 throw out bearing that i can give to napa?

 

I ordered mine direct from Novak, took a day or so to get the parts.

 

I run these, they are NOS inexpensive Schiefer clutch disks for 10.5" Ford 1-1/16" at 10 spline:

Garage Sale - Schiefer Mopar 10.4 Inch Clutch Disc, 1-1/16"-10 Spline | eBay

 

I am also looking at a puffed up Dauntless can you please pm me what you paid .the one Im looking at is all built never ran,cam headers and its been balanced

 

Cost about $2500 to $2800 to fully rebuild build a Dauntless with 100% genuine NOS parts.

 

You can buy just the 10 1/2' Ford disc...