1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Air Compressor

Discussion in 'The Tool Shed' started by string284, Jan 25, 2017.

  1. string284

    string284 New Member

    string284, Jan 25, 2017
    #1
  2. Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Quincy makes great compressors. That one looks old with lots of hours which could be good or bad. It looks to be a single stage.

    I would check out the inside of tank for rust threw on the bottom inside if you can. There should be an inspection opening. The air dryer is a plus if it works. That said a 1/2 HP motor is very small. The motor doesn't look like a 1/2 HP...
     
    Admiral Cray, Jan 25, 2017
    #2
  3. GeoffreyL

    GeoffreyL Well-Known Member

    Whatever you do don't get an oil less compressor, they're loud as can be.
     
    GeoffreyL, Jan 25, 2017
    #3
  4. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I can't see it running with a 1/2HP motor . but it's only a single cylinder .
    you need to look at data plate for cfm at 100psi
    I would look for up right model / twin stage for shop air
     
    Twin2, Jan 26, 2017
    #4
  5. string284

    string284 New Member

    looking at uprights now. condition has me worried on that one.
    thanks guys.
     
    string284, Jan 26, 2017
    #5