1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where to find 7/8" shaft and U-joints for Koenig PTO?

Discussion in 'Early CJ5 and CJ6 Tech' started by joe51, Mar 14, 2012.

  1. joe51

    joe51 Member

    hello,

    I've found a Koenig PTO and winch that fit my CJ-5 but the PO doesn't have the shafts, hanger or U-joints that are needed to connect them together. I've been told that you can buy the parts commercially but when I search the only thing that I can find is 3 7/8" PTO shafts used for tractors. Can some tell me of someone that sells the necessary material? I'd like to buy shafts with the 1/4" keyways already cut into them but if necessary I'll find someone to cut them locally.
     
  2. nickmil

    nickmil In mothballs.

    Six States Distributing sells all that stuff. I buy yokes, u-joints, shafts, etc from them. Might also put an ad in classifieds. Someone may have that stuff laying around. If you have lengths you need that is also helpful.


    Sent from my iPhone using Tapatalk
     
  3. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Grainger? Tractor Supply? E-bay?

    Try googling for what you need. I got lucky and found mine super cheap from a surplus catalog, such as Surplus Center. (Found the shafting at the dump - just drilled it for roll pins in place of keys)
     
  4. jeep2003

    jeep2003 Well-Known Member