1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pintle Hook Mount.

Discussion in 'Early CJ5 and CJ6 Tech' started by 1960willyscj5, Nov 27, 2011.

  1. 1960willyscj5

    1960willyscj5 Well-Known Member

    1960willyscj5, Nov 27, 2011
    #1
  2. jeepcj

    jeepcj Member

    I dont know the answer to your question, but from looking at the part you posted, I would think it wouldn't be very hard to widen or narrow it to fit the frame rails.
     
    jeepcj, Nov 27, 2011
    #2
  3. 1960willyscj5

    1960willyscj5 Well-Known Member

    I was thinking that also. Plus the stubs of the angles that are still under there will give good mounting points to the forward end of the install.
     
    1960willyscj5, Nov 27, 2011
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    They are different parts between a 3 & a 5 according to the parts manual (p/n 647418 vs. 807019), probably due to a 5 frame being a few inches longer.

    H.
     
    Howard Eisenhauer, Nov 27, 2011
    #4