1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

15" or 16" rims

Discussion in 'Flat Fender Tech' started by all4jpn, Mar 18, 2011.

  1. all4jpn

    all4jpn Member

    ok..so I have a full set (5) of stock 16" rims for my cj2a...I also have a full set of 15" rims from an old cj5.....so...I know asthetically there are minor differences, but what do you guys think in regards to rims size versus tire size..in your opinions go with 15" and a modern tire size..no tubes, etc..or go 16" etc.....thanks
     
  2. w3srl

    w3srl All-around swell dude Staff Member

    You will more than likely have to run tubes with whichever you choose, the old-style rims are no known for holding air very well.
     
  3. tcfeet

    tcfeet Member

    I have 15" rims on my 64 cj, and have 225 tubeless
    on them. So far no problem with them,. They ride good
    and give good traction on hard-surface also.
     
  4. all4jpn

    all4jpn Member

    tcfeet...do you air down at all?....wondering if that makes a difference?
     
  5. garage gnome

    garage gnome ECJ5 welder

    My 15" wheels on my 3A look like 16"ers. I like the looks of them better. I haven't priced out tires yet, but I would imagine the 15" ones are less expensive than 16" tires.

    [​IMG]
     
    Last edited: Mar 18, 2011
  6. windyhill

    windyhill Sponsor

    Go 16's since you have them, they look the best.
     
  7. tcfeet

    tcfeet Member

    No, I run 30-32 lbs.
     
  8. Mike C

    Mike C Member

    15 years ago I might have said 15's, buy anymore that limits your tire options. 16's will give you more choices now. Go with the 16's IMO.
     
  9. nickmil

    nickmil In mothballs.

    Also think about future brake upgrades 16"opens up more options having said that, I like the look of 15's
    Posted via Mobile Device
     
  10. sbu22

    sbu22 Member

    No problems running tubeless on my stock 1960 15s - but, I don't air them down, just steady 30 psi or so.