1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tach and Pertronix 1548

Discussion in 'Early CJ5 and CJ6 Tech' started by 1960willyscj5, Mar 19, 2008.

  1. 1960willyscj5

    1960willyscj5 Well-Known Member

    I'm getting the Pertronix 1548 for my IAY 4401B distributer. Right now I'm fighting with the points in there and they seem to be real touchy about being right at the .020" gap. Doesn't want to run at any thing else. No +/- .001". I have a Sun tach wired in the way the directions tell me Bl = ground; Gr = Coil -; R = switched power; W = dash lights.:coffee:

    Does the wiring change when the 1548 is installed? I don't want to burn out the tach if it can be helped.:rofl:

    Thanks a lot.:hurrican:
     
    1960willyscj5, Mar 19, 2008
    #1
  2. kiowamtp

    kiowamtp Member

    Your tach will work the same with either points or petronix. No worries.
     
    kiowamtp, Mar 19, 2008
    #2
  3. 1960willyscj5

    1960willyscj5 Well-Known Member

    Nice to know, thank you:hurrican::):coffee:
     
    1960willyscj5, Mar 19, 2008
    #3
  4. weedy

    weedy Member

    Be safe Kevin. Givem hell!
     
    weedy, Mar 26, 2008
    #4