1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

43 Willys with loose shifter?

Discussion in 'Flat Fender Tech' started by schardein, Nov 28, 2007.

  1. schardein

    schardein Low Range Therapy

    I've got a 43 Willys that has what I think is the stock tranny. The shifter handle is real loose, making it hard to find the gears... otherwise it is fine. Is there a bushing or springs that could be worn or missing to cause this?
    Thanks
     
    schardein, Nov 28, 2007
    #1
  2. nickmil

    nickmil In mothballs.

    If it is still the stock T-84 the stick should be held on by a threaded cap on the shift tower. Underneath should be a metal shield and a spring. Common for the spring to collapse or be missing. Also check the pins as they wear. Herm should have parts for these. Nickmil
     
    nickmil, Nov 28, 2007
    #2
  3. schardein

    schardein Low Range Therapy

    OK, so they are like the shifter on a T18? Thanks!!
     
    schardein, Nov 28, 2007
    #3
  4. w3srl

    w3srl All-around swell dude Staff Member

    Si. The pins get really sloppy with age and use.
     
    w3srl, Nov 28, 2007
    #4