1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where to plug in Temp Gauge Probe

Discussion in 'Intermediate CJ-5/6/7/8' started by Sac26, Jun 4, 2006.

  1. Sac26

    Sac26 New Member

    I have the I6 1977 Cj5 and i am not sure where the temperature probe needs to be plugged into the block.
     
    Sac26, Jun 4, 2006
    #1
  2. springerfever

    springerfever Member

    The 258 has a threaded hole for the temperature sending unit right beside the thermostat housing. You can also use one of the block drains on the left side of the block.
     
    springerfever, Jun 4, 2006
    #2
  3. wsg

    wsg Member

    Yup, if your wanting to put one of the aftermarket temp probes in youll havta use the drain hole on the side of the block. At least thats what i had to do. ooo Drivers side.

    Hope it helps
     
    wsg, Jun 6, 2006
    #3
  4. MCSCOTT

    MCSCOTT Member

    X2, the aftermarket probe will not work where the factory sending unit is. Use the drain hole in the block.
     
    MCSCOTT, Jun 7, 2006
    #4