1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Up a creek without a tub

Discussion in 'Early CJ5 and CJ6 Tech' started by gscj5, Aug 8, 2005.

  1. BlueFlu

    BlueFlu past owner of some ecj5's

    If I can swing it, I'm close enough to pick up one up myself. 4/5 hours away.
    If, and its a mighty big if right now, I can do it I'll go in on the package though to help cost.

    What time frame are y'all looking at?
     
  2. jollyjeepers

    jollyjeepers Member

    We can help with the same thing. We think we could stack them in the trailer and get some in the back of the truck as well. Except for Saturday's when Pete has to work, Pete has all week that he could travel and pick up or drop off as needed. Maybe between us and kamel we could swing this.

    It sounds cheap enough to make it easier to put one of these on the new V8 jeep instead of doing a body swap.

    Can we get a sign up list started with locations and time frame you are interested?

    Beth
     
  3. sparky

    sparky Sandgroper Staff Member Founder

    Before we do a sign up list, who's going to get the tubs, what's the price etc.

    After we know that I'll start a sign up list.
     
  4. jollyjeepers

    jollyjeepers Member

    :rofl: Oops.

    I just get so excited. :oops: I'll back away from the keyboard now.

    I've copied down the number and will ask Pete to call tomorrow and get the skinny.
     
  5. sparky

    sparky Sandgroper Staff Member Founder

    Are you and Kamel both going to get tubs, Jerry too? Etc. we should figure that out first IMO.
     
  6. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Go Beth!

    Very nice of you guys!!!!!!

    Sparks right figure it out and go!
     
  7. Ledge

    Ledge Member

    Grrrrrr! I'm too far away!!! Anyone else in New England interested?
     
  8. gscj5

    gscj5 H2 Recovery Team

    Hey guys don't forget me ...the guy who started the post,lol. I will take one also, I live north of dayton about an hour from Cincy in Brookville, OH. Any Reds home games the week we go down would be fantastic also. I'll meet you for lunch in Cincy its on me. Just let me know pricing and any shipping charges. Thanks a bunch guys...I'd almost givin up hope.
     
  9. speedbuggy

    speedbuggy Looking for a Jeep now

    Pics of the tubs and noses
     
  10. speedbuggy

    speedbuggy Looking for a Jeep now

  11. Boyink

    Boyink Super Moderator Staff Member

    Just FYI...IMHO...etc.

    After owning a 1-pc front clip for years I'm glad to be back to a standard front end.

    You lose alot of underhood mount points. My OBA setup was inside then, and sits on top of the fenderwell now.

    You'll need to fab up a rad mount.

    To swing the clip back on stock hood hinges you'll either need a lift, or hack off the lower bottom rear of the front fenders and attach those to the body.

    I believe 4WD has a kit to flip 'em forward, but then no bumper mounted lights or winches.

    It *was* nice for engine work, I had connectors in all the wiring so I could pull the entire front in about a minute. But overall I like the stock setup better. Fenders can be pulled easy enough.
     
  12. sparky

    sparky Sandgroper Staff Member Founder

    5 slot grill?

    What's up with the "cargo" area on the tub?

    If I have to give up that much room in what's already cramped I'll pass. Thanks for the pics Dennis.
     
  13. Patrick

    Patrick Super Moderator Staff Member

    Those just don't look quite right....
     
  14. cjtom

    cjtom hav'n fun yet

    These Pics Are From A Double Lined Tub That I Brought Back Don Also Has Regular Style Tubs. The Jeep I Am Building Back Up Will Be For The Race Track So I Dont Need Storge.i Brought 2 More Tubs That Are Original Design With A Flat Floor.this Clip Also Is A Front Tilt He Has Both Styles
     
  15. speedbuggy

    speedbuggy Looking for a Jeep now

    Tom bought this style on purpose. They have the regular style tubs as well. He is going to use the space in the rear of the tub for tool storage (it's double wall). You have a choice of the 'normal' or this style. I forgot about that... :oops:
     
  16. sparky

    sparky Sandgroper Staff Member Founder

    Oh!

    Well in that case. I don't fancy a 1 piece nose, but a regular tub if well constructed depending on the price...
     
  17. $ sink

    $ sink Gazillians of posts

    Hey, when all of you get done wrapping your A$$es in 'Glass, and all of these discarded steel tubs are litterin the landscape, don't forget those of us strugglin to keep steel tubs in service...

    If the tub isn't worth saving, maybe some panels could be cut from it to help others out. $.02
     
  18. sparky

    sparky Sandgroper Staff Member Founder

    Uhh, I don't think you want any of my rust or Bondo. R)

    I thought about patching it. I don't think it's worth it. :(

    Prolly get a second opinion on it first though.
     
  19. $ sink

    $ sink Gazillians of posts

     
  20. cjtom

    cjtom hav'n fun yet

    My Tub Is Shot Front Fenders Are Shot. Wanted To Go Steel For Pushing Sprint Cars On Dirt For The Strength, But Just Could Not Pass Up The Price Last Month For Com Plete Body. If Anything Is Left Will Let You All Know When Done This Winter.