Cable Routing

I know it seems trivial, but where exactly should the Speedo and E Brake cable be routed on an early CJ5.

I tried search, but didn’t get any valid links or good pictures..

 

I’d be interested in learning this as well.

 

Also just noticed that the cable I ordered has a threaded end, but the clevis I ordered is not threaded…

I don’t have another Willy’s to check, just my AMC era CJs

Does the cable mount to the forked cleat on the crossmember?

 

The cable mounts to the crossmember with a clamp (park brake cable). The small vertical fork on the crossmember is for the engine stay cable iirc.

 

Thank you.
Can anybody shoot a pic or 2. Is there a part number for the clamp?

 

cable end clamp . would go into two holes where allen bolts are

 

Thank you. So bolts into the crossmember with the clamp available from Walcks…

https://walcks4wd.com/Emergency-Cable-Clamp-Lower_p_261.html

 

Yup. That's the one

 

Pm sent

 

Jumping on this thread to see if I can get some information also, I am in the process of the reassembly of my 1973 resto, looking for a picture of the e-brake cable setup from the front to the back two cables. Mine were rusted off when i got it so I dont have the pictures of what it looked like before disassembly. I can start a new thread if needed but thought i would start here first. any help would be greatly appreciated.

 

This thread is about early CJs, which ate totally different from your 73.

 

Thanks, I'll move it to the right group.