1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transmission To Transfer Case Mating Together Prob.

Discussion in 'Early CJ5 and CJ6 Tech' started by Trunningen, May 7, 2016.

  1. Trunningen

    Trunningen New Member

    I have a 68 cj5 w/T86-AA trans. and am having trouble putting the transfer case back together. Is there a correct way to do this? Do I put the output gear on after mounting the case to transmission. Thanks,Thomas. Help plz.
     
    Last edited: May 7, 2016
    Trunningen, May 7, 2016
    #1
  2. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I am guessing you have a 4 cylinder jeep with small hole transfer case . yes the output gear goes on after you bolt up transfer case
     
    Twin2, May 7, 2016
    #2
  3. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Did you take this drive train apart for repairs or have you ever had it together?

    The T-86AA was used with the large opening D-18 and you can put the transfer case on with the output gear in place.
     
    Walt Couch, May 7, 2016
    #3
  4. oddfirejeeper

    oddfirejeeper Active Member

    also if you took the transfer case off the trans maybe some of the needle bearings in the trans fell out? my t-14 did that and had issues installing back together.
     
    oddfirejeeper, May 9, 2016
    #4