So....take out all the copper lines and sell for scrap $??? I guess if they are in good shape it would be ok.
Alright! I shortened the ground cable last night and still had nothing. About 15 minutes later I hooked up a completely different battery and...
I have tried 2 diff starters. One came on it and the other came off my other Jeep. I think at last count I've had 4 different solenoids on it at...
Yeah Yeah.....I've been really busy with work lately. I finally got it running last Thurs night. The 15th time I put the starter back on it it...
I have replaced some other stuff on the new Jeep looking for the problem and still have no answers. I shimmed the starter from 0 to 100...
My battery is in the back on this one. I'll look at that. There are no missing teeth on the flywheel or starter gears. I think I'll put the new...
The thought had crossed my mind......several times. I went through 3 solenoids and 2 starters last night with no luck. I put a brans new...
we tried the hammer trick and it did nothing.
It spins and whines but the engine is not being turned over. I'll have to check the solenoid. He may have put on a new starter and swapped the...
both are brand new, I know new parts can be faulty but the PO said it did the same think with the old starter also.
The flatty I just picked up is in great shape except for one little problem. When it is warmed up to running temp, (ie, been out for a drive and...
I know they never made a roller 231 for a RWD application. Not the question, just so you know.
We put a 2a body in an 8ft pickup bed and got the tailgate closed. It tucked in nicely behind the toolbox. Two guys can move/flip one but three...
I've been thinking about doing a spare carrier. That looks good. As others have said, just need a way to stabilize the tire up higher also....
Separate names with a comma.