Well, I should have listened to Daryl and ditched the electric fuel pump and went with the mechanical. I didn't have the correct Holley bypass...
I already have that Holley pressure regulator, so I'll just plumb the other end for my return. (Thanks) I'm guessing the small return line is the...
I haven't had this Willys but a little over a year now. Among a lot of annoying issues I'm sorting out, vapor lock is one of them. This vehicle is...
Bargains come in all kinds of flavors. I guess it comes down to what the market will bare. Myself as Chris stated above, I'm cheap! 39K dollars...
The shop in Portland that rebuilt my T18 was J&H Four Wheel Drive. I tried to look them up tonight, but it looks as if they went out of buisness...
Nick, I'll have to dig my paperwork out. I know some people complain about the T18 being hard or maybe I should say slow to shift, but this one is...
Thanks for everyone's input, I greatly respect everyone's knowledge here! I kind of chuckle, because I know what the right thing to do is, I just...
The short version, I found water in my T18 and developed a whining noise at about the same time period. I'm not in a position to pull it right...
Slotted are at the top of my list of favorite wheels. Nice score! They look sharp and are of the time period. Wish I had a lathe (and knew how to...
For some reason those look small like 5 on 5 rather than 5 on 5.5 bolt pattern. The 5 on 5's where used a lot on 2wd GM trucks, I think from the...
Tarry, that's a cool brake system you came up with. I don't think I have the knowledge base to understand the valve you're describing. The...
Although a different animal, I had a CJ5 stainless screen mounted on the inside of my CJ2a grill. It was formed by bending and didn't want to go...
I'll probably go down in flames for posting here regarding anything to do with flat towing (FT), but I've always lived on the edge so here goes....
Separate names with a comma.