There is an early 5 in a shop near my house that has a 360 in it. Next time i drive by i will get pics of it.
I usually glue the gasket to the cover with 3M weatherstrip adhesive ad put a thin layer of rtv on the head side. tighten by hand till the bolts...
Steering in an FC isnt even close to what is in a CJ. I dont think a saginaw box would work. Supposedly a power box from a toyota pickup can...
Might not shift very well without the clutch. You will probably have to shift it while stopped. I usualy leave mine in OD all the time. RSN
Are there any numbers or identifying marks on the piston? RSN
Had something similar happen to my M38A1. Screw fell out of the bottom plate on the Q-Jet and into one of the cylinders (don't remember which...
I have used that in 4 engines in the last couple months. It is a cam break in aditive. RSN
I think a 2.8 v-6 bellhousing will fit. Don't know where you will get a flywheel. Where are you located? RSN
The radio in my '63 FC170 is a motorola if that helps RSN
Your engine will last longer if you have it balanced. Probably wont have any increase in performance.
A Piece of motorcycle chain might make a good upper holder. Just knock one of the pins out and drop a nail through it to keep it secure. Or weld a...
There are a few on ebay. RSN
Call the local welding shops. They usually have a big pile of cut off pieces. RSN
My solenoids are in the passenger side box under the bed. I don't like to mount electrics on the front in the weather.
Probably not what you are looking for but here's mine. http://grinsha.rack111.com/fc170ramsey.htm
Separate names with a comma.