1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

truckee4x4's Recent Activity

  1. truckee4x4 replied to the thread Spider Gear Replacement.

    Copy that... anyone know where to get them? Am I going to destroy the lock pin by tapping it out to check the washers?

    May 20, 2020 at 5:12 PM
  2. truckee4x4 attached a file to the thread Spider Gear Replacement.

    hey @jeepstar - question for you. When you took out your Spider gears, were there any shims between the conical / thrust washers? The...

    IMG_2539.jpg May 20, 2020 at 11:42 AM
  3. truckee4x4 replied to the thread Front Axle Woes.

    Yup - great advice, that was the first thing I did was carefully make some setup bearings. Probably would have given up already if I...

    May 20, 2020 at 10:08 AM
  4. truckee4x4 liked Muzikp's post in the thread Front Axle Woes.

    Yes, setup bearings will save you a lot of time and grief. I'm not an expert (only done 3 so far) but I agree with using the same shims...

    May 20, 2020 at 10:05 AM
  5. truckee4x4 liked duffer's post in the thread Front Axle Woes.

    No one has mentioned carrier set up bearings but a pair of those make the job soooooo much easier. You can determine the carrier shim...

    May 20, 2020 at 10:05 AM
  6. truckee4x4 liked Buildflycrash's post in the thread Front Axle Woes.

    You’re not going to fail. I was referring to that first axle.

    May 20, 2020 at 10:05 AM
  7. truckee4x4 replied to the thread Front Axle Woes.

    Can you elaborate on why you think I’m going to fail?

    May 19, 2020 at 5:00 PM
  8. truckee4x4 replied to the thread Front Axle Woes.

    Yes that is currently the plan - to keep the set from the original axle together and transplant into the “new” housing.

    May 19, 2020 at 2:01 PM
  9. truckee4x4 attached a file to the thread Front Axle Woes.

    Getting ready to start the differential rebuild this weekend, and I wanted to run my numbers and plans by you guys to see what the...

    Photo May 19, 8 07 25 AM.jpg Photo May 19, 7 25 12 AM.jpg Photo May 19, 8 06 46 AM.jpg May 19, 2020 at 11:56 AM
  10. truckee4x4 replied to the thread Dana 44.

    Does anyone know the nominal pinion depth checking distance for a Front axle D27A 3.73 (1966 CJ5 V6)?

    May 18, 2020
New Posts