1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

timgr's Recent Activity

  1. timgr replied to the thread WTB Turn Signal Lever.

    Yes, hazard switch is on the dash.

    Nov 11, 2019 at 4:06 PM
  2. timgr liked Norcal69's post in the thread 4 Speed Identification.

    Opening it up. Some minor rust, nothing that wont be polished off after a few miles. The input is 17 tooth. Would that indicate A 6.32...

    Nov 11, 2019 at 2:06 PM
  3. timgr attached a file to the thread 4 Speed Identification.

    As I recall, only the CJs got the close-ratio T-18, so every J-series will be 6.32 (wide ratio). Yes, 17 tooth is wide ratio. Also, I...

    upload_2019-11-11_13-46-26.png Nov 11, 2019 at 1:49 PM
  4. timgr liked Norcal69's post in the thread 4 Speed Identification.

    Input shaft is 1-1/8" 10 spline. Steps down to 1.120" after the splines. Looks like it would be pretty easy to have my brother chop and...

    Nov 11, 2019 at 12:49 PM
  5. timgr replied to the thread thicker rear corners.

    Locally I found a HVAC shop that made their own ducting parts in steel. They only had 24 ga galvy and 16 ga hot rolled (apparently) but...

    Nov 11, 2019 at 11:51 AM
  6. timgr liked Norcal69's post in the thread 4 Speed Identification.

    Seller was a super nice old guy. Transmission and transfer case both shift nice. [IMG] [IMG] [IMG]

    Nov 11, 2019 at 11:20 AM
  7. timgr replied to the thread 4 Speed Identification.

    Input looks long to me. 941724 is J-series 327 4WD

    Nov 11, 2019 at 11:19 AM
  8. timgr replied to the thread Bought A 1960. Have Questions.

    Agreeing with Pete, seems like any of these Jeeps not owned by an enthusiast needs the front end thoroughly gone through, steering wheel...

    Nov 10, 2019 at 4:05 PM
  9. timgr replied to the thread Power Steering Return Hose Blew.

    No expert here, but I would think the larger port would be low pressure, since liquids are incompressible and the flow per unit time, in...

    Nov 9, 2019 at 8:39 PM
  10. timgr attached a file to the thread 4 Speed Identification.

    Dana 20, but no indicator lamps. Apparently those were only present on 230-232-327 cars, and maybe only Wagoneers. Hard to be any more...

    upload_2019-11-9_11-38-18.png Nov 9, 2019 at 11:38 AM
  11. timgr replied to the thread 4 Speed Identification.

    Well, "J" or "U", both are made-up names to describe that type of shifter with the control box. Both are in common usage. Jeep does not...

    Nov 9, 2019 at 11:35 AM
  12. timgr replied to the thread 4 Speed Identification.

    What seems wrong about it? It's a U-shifter, and the location wrt the transmission stalk looks ok to me. It has two shifter switches,...

    Nov 9, 2019 at 11:12 AM
  13. timgr replied to the thread 4 Speed Identification.

    I tried. There are 14 different T-98s and T-18s for these trucks '62-73, not counting the similarly abundant 2WD versions. If it's a...

    Nov 9, 2019 at 11:03 AM
New Posts