You guys are my HERO's Thanks!!!
Ok I finally found a flanged axle 44 for my 66. I pulled the axles out and am trying to find the bearings but not having much luck talked to...
Might add I was staying at Estes park 8,000 ft then went to black hill SD, 3-7,000 ft. The Jeep did fine in these lower elevations.
I took my 66 cj5 to the Rockies last summer. The guys here helped a lot do some searching for mntbuggy and you can find the links. Mine is a v6...
He didn't say they were not. I did some more digging and found http://www.detroitvintagewheels.com/home.html. They have ones like mine in...
I have always liked these, thought about replacing them with something else but I will keep these one will show up sooner or later. ( I hope)
I sent him an E-mail and he did not have any but would e-mail me if he gets any. Thanks for the help with the name Jackman. I did a quick...
I have looked in the past and never been able to find a name. Since these were made in the 70's there were not that many making alum wheels....
Thanks for the info for the repair. I have looked on E-bay off and on for many years :-) with no luck. Keep looking though
Yes the wheels are really cast aluminum , Just polished !!! It has "made in the USA' and '15 x 7.5' cast on the inner bead. The spokes...
I have had this set of Aluminum Spoke wheels on my jeep for probably close to 25 yrs. I bought them used then. One of them has had a crack in...
When i was rebuilding my engine (225 V6) i had the heads rebuilt. Chances are the valve guides are worn due to normal use. The shop i used was...
Mine was pretty rusty too. I found another Jeep that had a nice tub on it. I switched the tub/ body out and sold the donor jeep drive train with...
Separate names with a comma.