So the gears match and have no shims. So having HEI I don't need the Ignition terminal so a 96 Camaro 5,7 will work. About how much and PN for the...
Have you thought of going with HEI it was the best thing I ever did for my 1968 225 It starts on the first bump compared to have a long crank....
So here is the data on L.E.D conversion First of all there is not enough resistance with LEDs it loads with all lights front and rear and...
I think I cooked my flasher how a three-prong works in an Old jeep The Flasher has failed. The way it's wired works like this. White is the...
That's a very good idea I will do that, good job thanks smart on your part why did not think of that.
So I pulled the flasher and get hot not opening and closing I think I took it out my flasher after 50+ years. I installed the old-style bulbs and...
Yes, I going to wire in one side with the old lights and see what happens. Thanks, everybody for the assistance, I must be crazy but its a challenge
I think you are right. I have a flasher coming if that does not work they will go back along with the flasher. And I will put in the incandescent...
You are right they do flash but the light in the turn signal switch is not working I should have made it more clear in my post. I ordered a...
So I needed new rear tail lights so I purchase Rugged Ridge 12403.84 Tail Light Kit. So wire properly and the turn signal indicator does not flash...
I am preparing to paint the jeep engine compartment. Is there Dupli-Color that comes close to the Sprue tip green, and is there a place to get...
I don't think there's room for a fan clutch I think that would be the way to go they work well.
Separate names with a comma.