I will be using the flywheel and bellhousing from my old 232
Hey guys, I’ve got a 1980 258 that I will be installing in my 73 CJ5 that has a T14 transmission. I know the input shafts on the transmissions...
Any luck getting pictures? I can’t view the one that you posted
258 with upgraded cam shaft and Holley sniper EFI. Rebuilt T-14 and Dana 20. 4.27 front and rear axles.
Anybody running these tires? I’m thinking about running a set once I get my 1973 rebuilt but looking for pictures and lift specs Love the...
I believe once I get the transfer case installed onto it, it will go away. It looks like the play is coming from where the drive gear shaft slides...
I have the transmission reassembled. Ended up have to use 8 spacer washers to get the outer washers flush. I have one more question for you. If I...
Thank you for your help. I will post an update once I get it cleaned up and start rebuilding.
I can’t get a picture that shows much. Once I get the outer washers to sit flush, and install the thrust washers the shaft should be installed...
That is probably what I will do. I am going to post a picture of the case could you confirm that everything looks normal. This is my first time...
Correct. Those 4 washers. I didn’t think about comparing the length of the bearings. I just compared an old to a new and they appear to be the...
So I have disassembled my T-14 tranny. When removing the roller bearings and spacer washers from the counter shaft, I removed 4 set of spacer...
Separate names with a comma.