There are a number of things you can do, but THE MOST IMPORTANT thing to do is be sure you have paint and primer everywhere. Uncoated metal is the...
I would agree with timgr. Someone swapped the axle. I don't see if you mention what transfer case you have, it may be the same setup I have in my...
Thanks! Being the owner of 13 Jeeps of various years I am well aware of the differences in lettering and when it changed. I consider the pic you...
I agree with Zoomer. The factory roll bar in the 80's went all the way to the floor and the aftermarket roll bars in the 60's and 70s were fender...
If so for that kind of money either it was a steal or it was in bad shape. A beat up winch itself goes for about that. a beat up shaft and a beat...
It would not have a tailgate, D slot rims, rollbar.
With a budget of 300 an newer electric winch is IMO your only option. A PTO winch complete will run you around a grand If you can find one. Koenig...
If it's a late 72 it would not surprise me it has 73 features. The only difference with a 72-75 tub that I know of is the JEEP stamping. A 72...
They fill very, very, very slow...... I hate the one in my Scrambler.
Then you NEED an intermediate with V8's.... and then later CJ7's.... and then who doesn't NEED a scrambler???? I started out NEEDING one for off...
I'm up to 13. I definitely have the acquisition syndrome. Affliction isn't the word for what I've got.
I would like to see that setup. Some good pics of the winch too. I have a J-22 and it is hard to find very much info. It was converted to PTO...
I know this is old, but did you ever get any info you were looking for? I have one of these and could probably answer some questions.
Is it possible to take pictures of how your pump and valve is installed? That's really all I am looking for here.
I have both, but my 4 way control valve is worn out and the up and down is slow if works at all. Some of this has to do with the retrofit mounting...
Separate names with a comma.
