JP magazine did a tire review about 2 issues ago. I based that article on my new tire purchase--or vice versa. I orderd BFG Mud Terrains from...
I'd recommend putting in a comprehensive carb kit. If it is the original Rochester, it is not that hard to do. Take pictures and take your time...
I find no evidence that they were on my 67.
OK, I got it fixed. I ground on the hold down on the dist cap enough to get the movement I needed. Thanks to the information gleaned from...
Since I'm so simple when it comes to distributors--do I pull it out, rotate the oil pump drive shaft a little counterclockwise and stab it, the...
I am setting up the new HEI distributor on my 67 CJ5 with the 225 and I can't rotate the distributor CCW enough to keep the timing from being...
You can get a combo that fits in a 2" receiver, but it might not meet your load rating.
If it was me, I'd get an EZ wiring kit for $115 off ebay and rewire. I'm finishing installing one in my 67 CJ5. It is complete with all the...
The wire for the coil that bypasses the resistor is hooked-up to the S on the ignition switch. The positive from the alt goes direct to the...
Re: Help a girl out New Jepp Project My Dauntless has the pcv hose on the passenger's side valve cover hooked to the intake under the carb. On...
If I had more room I'd have more Jeeps and parts too.
Re: Help a girl out New Jepp Project I have the original oil-bath air cleaner for my 67 with a 225, but I wanted a typical chrome top with the...
Harbor freight runs coupons occasionally for a 20oz gravity gun for $10.00. You really ought to try one of those just for grins and see if you...
When I took mine to the machine shop in they used a hole saw the fit tightly around the stud and drilled a little into the outside face of the...
Separate names with a comma.
